CHAPTER 7 - WEIRS
Ackers, W.R., J.A. Perkins, and A.J.M. Harrison, Weirs and Flumes for Flow Measurement, John Wiley & Sons, New York, 1978.
Aisenbrey, A.J., Jr., R.B. Hayes, H.J. Warren, D.L. Winsett, and R.B. Young, Design of Small Canal Structures, Bureau of Reclamation, Denver, Colorado, 1978.
Bergmann, J.M., Compound Weir Study, Hydraulic Laboratory Report No. Hyd-505, Bureau of Reclamation, April 5, 1963.
Bos, M.G. (ed.), Discharge Measurement Structures, International Institute for Land Reclamation and Improvement, Publica-tion 20, third revised edition, Wageningen, The Netherlands, 1989.
Brakensiek, D.L., H.B. Osborn, and W.R. Rawls (coordinators/editors), Field Manual for Research in Agricultural Hydrology, Agricultural Handbook 224, U.S. Department of Agriculture, U.S. Government Printing Office, Washington, DC, 1979.
Francis, J.B., Lowell Hydraulics Experiments, D. Van Nostrand, fourth edition, New York, New York, 1883.
International Organization for Standardization, "Measurement of Liquid Flow in Open Channels," Handbook No. 15, Geneva, Switzerland, 1983.
King, H.W., and E.F. Brater, Handbook of Hydraulics, fifth edition, McGraw-Hill Book Company, Inc., New York, 1963.
Kindsvater, C.E., and R.W. Carter, "Discharge Characteristics of Rectangular Thin-Plate Weirs," Paper No. 3001, Transactions, American Society of Civil Engineers, vol. 124, 1959.
Kulin, G., and P.R. Compton, "A Guide to Methods and Standards for the Measurement of Water Flow," Special Publication 421, National Bureau of Standards, 1975.
Palde, U.J., Hydraulic Laboratory Studies of a 4-Foot-Wide Weir Box Turnout Structure for Irrigation Use, Report REC-ERC-72-31, Bureau of Reclamation, Denver, Colorado, September 1972.
Shen, J.A., "Preliminary Report on the Discharge Characteristics of Trapezoidal-Notch Thin-Plate Weirs," U.S. Geological Survey, July 1959.
Simmons, W.P., and W.D. Case, Hydraulic Model Studies of Small Weir Box Turnout Structures for General Irrigation Use, Hydraulic Laboratory Report No. Hyd-396, Bureau of Reclamation, Denver, Colorado, October 21, 1954.
Skogerboe, G.V., L.M. Hyatt, and K.O. Eggleston, "Design and Calibration of Submerged Open Channel Flow Measurement Structures, Part 4-Weirs," Report WG31-5, Utah State University, May 1967.
Wahlin, B.T., and J.A. Replogle, Flow Measurement Using an Overshot Gate, published for Reclamation by UMA, Inc., 1994.