CHAPTER 1 - INTRODUCTION
American Society of Mechanical Engineers, "Fluid Meters, Their Theory and Application," H.S. Bean, ed., Research Committee on Fluid Meters, sixth edition revised, New York, 1983.
American Society of Mechanical Engineers, "Performance Test Codes-Hydraulic Turbines and Turbine Mode of Pump/Turbines," revision, Performance Test Code Committee No. 18, New York, 1992.
Bos, M.G. (ed.), Discharge Measurement Structures, 3rd edition, International Institute for Land Reclamation and Improvement, Publication 20, Wageningen, The Netherlands, 1989.
Bos, M.G., J.A. Replogle, and A.J. Clemmens, 1991, Flow Measuring Flumes for Open Channel Systems, John Wiley & Sons, 1984, and American Society of Agricultural Engineers, New York, 1991.
Brakensiek, D.L., H.B. Osborn, and W.R. Rawls (coordinators/editors), Field Manual for Research in Agricultural Hydrology, Agricultural Handbook 224, U.S. Department of Agriculture, U.S. Government Printing Office, Washington, DC, 1979.
Clemmens, A.J., M.G. Bos, and J.A. Replogle, "FLUME: Design and Calibration of Long-Throated Measuring Flumes," version 3.0, International Institute for Land Reclamation and Improvement, Publication 54 (with software), The Netherlands, 1993.
International Organization for Standardization, "Liquid Flow Measurement in Open Channels - Using Weirs and Flumes," ISO 1438, Geneva, Switzerland, 1975.
International Organization for Standardization, "Measurement of Liquid Flow in Open Channels," Handbook No. 15, Geneva, Switzerland, 1983.
International Organization for Standardization, "Measurement of Flow by Means of Pressure Differential Devices," ISO 5167-1, Geneva, Switzerland, 1991.
U.S. Geological Survey, National Handbook of Recommended Methods of Water-Data Acquisition," prepared cooperatively by U.S. Government agencies, Government Printing Office, Washington, DC, 1980.